WMF 1100S User Manual Download

Page: 37 / 116

User Manual WMF 1100 S

Operation | Constant water supply (optional)

4.16 Constant water supply (optional)

A constant water supply and drain can be connected
with a retrofit kit.

With the constant water supply, the water tank
may be removed only when the display shows
an appropriate message, or when the machine is
switched off.

4.17 Switch off the coffee machine

Take care to work hygienically

• Germs that are hazardous to health can grow

in the coffee machine.

> Perform Switch-off rinsing before switching

off the coffee machine.

Follow the manual

• If this is not followed, the liability is

invalidated in the event of any resultant
damage.

The ON/OFF switch is located on the right side of the
operating panel.

Press the ON/OFF switch briefly (approx. 1 second)

Coffee machine switches off.

Disconnect mains plug

Coffee machines with a constant water supply

Turn off main water supply tap

IMPORTANT

Constant water supply retrofit kit

Accessories and spare parts

page 112

CAUTION

Follow the Safety chapter

starting on page 7

Clean the coffee machine as shown
in the manual.
Care

starting on page 72

IMPORTANT

Follow the Warranty chapter

starting on page 107

ON/OFF switch

Summary of Contents for 1100S





















































































































Search results

Summary of Contents for 1100S

Reviews:

Related manuals for 1100S

Brands by name

Popular brands

WMF 1100S, User Manual

Search results

Summary of Contents for 1100S

Reviews:

Related manuals for 1100S

Brands by name

Popular brands