-
Life signal sending port
-
Life signal sending protocol: time server communication format, which can be:
MQTT, STNP, NTP, LwM2M
-
Time server IP address: where you want to getting the date and time (imortant for
reliablity and validation of data)
-
Time server port
-
Starting LED operation time: you can define the LED operation duration, which
means how long will be active the LED, when you connect the battery or pushing the
tamper switch (at enclosure top cover’s close). This is useful for testing the
communication, SIM and APN settings. Note, that the long operation time of the LED
can cause unnecessary battery usage.)
#Step 4: Setup the minimum required fields on the Extended configuration tab and below at
the Meter configuration tab:
-
Meter ID: unique identifier for easier indentification
-
Meter identifier nr. (input #1): for easier indentification
-
Meter type, serial nr. (input #1): for easier indentification
Check the pulse-liter counting settings also.
