Here you can define a new IP route rule, by the
button.
These can be performed by choosing the related interface and adding the Host-IP or Network
name, the IPv4-Netmask, and IPv4-Gateway.
To apply the new settings,
Save & Apply
your settings you made here.
3.8 Firewall settings
By default, the firewall service is active, but it allows all communication. It can be necessary to limit
the traffic.
We highly recommend to check the firewall settings and configure the communication
to reject the unnecessary boundaries.
Important!
We offer to check the network traffic on your router. Check connections and active
communication channels (port number, incoming IP) and listen the incoming activities and the
output traffic!
