address should be also changed, and you have to uncheck the
DHCP disabled optionfor the
BR-
LAN
interface to allow the DHCP server.
Save your settings by the
Save & Apply
button. Then the bridged
BR-LAN
interface IP address
will be changed according your request due to the new settings.
The IPv6 addresses can be also used. By default it is
disabled by the IPv6 assignment length (if
you want to use,
Enable it).
You can find further important
DHCP settings at the DHCP and DNS menu.
At the
General
Settings tab
tab you can define IP range
(Start, Limit) and
IPv4 netmask for your network.
