2.
Important notes
By security reasons, we do recommend to change the web user inteface login and
password as soon as you can.
The DUAL SIM mode is currently inactive (feature is under development).
The IPv6 protocol is disabled for the LAN interfaces by default, change it if you want to
use it instead of the IPv4 protocol. Use the Network / Interfaces menu
LAN1..LAN4
interface
and the IPv6 relevant fields.
The DHCP service is active for all interfaces, therefore the router will giving IP addresses for
the
LAN1..LAN4
connected devices, but the protocol which is used, configured for static IP
addresses for the ethernet interfaces. If you want to use and distribute IP addresses by
DHCP, change its protocol to DHCP client. You can change its settings in the Network / DHCP
and DNS settings menu or in the Network / Interfaces menu,
LAN
interface and
DHCP
section.
The Firewall service is active by default (by security reasons), therefore all communication
is disabled excluding the used ethernet, DHCP, DNS and WAN channels, web port and the
necessary services and ports for normal operation for the router.
We recommend you to disable all ports and protocols in the firewall which you are not using
actively or which are not necessary to the connection and data transmitting by respecting
the ports which are necessary for the general operation. Use to check Status / Firewall menu
to check the data throughput and the Network / Firewall to configure new roles.
The firewall is not protecting the router against external network or DoS attacks,
if you just enable the firewall feature. For a massive and advanced safety, you have to
customize the settings by harmonized with you used current network and connection
settings.
We offer to check the network traffic on your router frequently by the Status / Firewall
menu option to be ensured that all of your connections and active communication channels
(port number, incoming IP) are using only the wanted paths and routes and listening the
defined incoming activities and consequently occuring the estimated output traffic.
We offer to measure your throughput data and network traffic (by minutes, hours) –
use the Status / Realtime Graphs or Statistics / Graphs and calculate the estimable
data transmitting amount according your expectations and the data limits of the used SIM
card.
If you need, you can choose dedicated wireless service type or automatic mode (using which
is accessible). Therefore you can limit your data transmitting for 3G instead of 4G – for
