At the
LAN
interface’s
button, c
hoose the
General Setup
tab.
By default the Ethernet IP address is
static, the default IP address is: 192.168.1.1.). If you wand to
switch the
BR-LAN
interface to
dynamic (at Protocol field), then the router will waiting for an IP
address on the network.
Define a new IPv4 address, check the IPv4 netmask (subnet mask), IPv4 gateway values for
your devices according to your needs – to be able to serve your connecting devices.
When changing the Protocol field, youu need to push the
button.
If you want to use the local
DHCP server – to allow to add IP addresses by the router for the
connecting external ethernet devices – then the right setting is the
Static Address, and the IP
