2.10
Service features
The router has various service features which can be controlled manually - just for the case –
which can be initiated by pushing the Reset button (no. 11).
By any reason, if you need to
stop or start the device immediately or you cannot login into the
system, you can start or stop it manually here. It is useful when the router was misconfigured or
the installation process failed, IP address or the password was loosen.
Here we’ve listed all Service features of the Reset button which can be selected by manually.
Push RESET Legend
LED / signal
2 sec
START the router (when it was stopped
before, AND the device has power source)
the ON led will lighting (
green
)
6 sec
Power off / STOP the router (if it was
operating)
all LEDs will másodperc, only the
PWR led is active (
green
)
4 sec
SERVICE MODE MENU of the router (if
the device is operating) – the menu is active
for 1 minute
the KERNEL led will lighting by
red
,
while the service mode is active
The router Service menu has 4 modes (the menu is active for 1 minute only, while you can
be select a mode from the menu by pushing the Reset button until 1sec).
