1.
Wiring and Preparation
1.1
Description of interfaces
0 – Optional (not presented by general) ~110 - 230V AC connector can be supplied (4-pins
terminal block, order option), pinout from left-to-right: L, N, -, PE
1 – Power supply connector (12..24V DC, 2-pin terminal block), pinout from left-to-right: -/+
2 – micro SD card slot (for uSD card, for alternative uSD boot or data storage)
3 – micro USB connector (PC connection - USB LAN bridge - for configuration, debug)
4 – Primary SIM-card slot (2FF-type mini SIM card, push-insert)
5 – Secondary SIM-card slot for DUAL SIM option feature (2FF-type mini SIM card, push-
insert) – currently the DUAL SIM feature is not supported (under development)
6 – Ethernet LAN1 port (IEE 802.3, 100/10 Mbit FastEthernet, full duplex, bridged, RJ45
connector)
7 – Ethernet LAN2 port (IEE 802.3, 100/10 Mbit FastEthernet, full duplex, bridged, RJ45
connector)
8 – Ethernet LAN3 port (IEE 802.3, 100/10 Mbit FastEthernet, full duplex, bridged, RJ45
connector)
9 – Ethernet LAN4 port (IEE 802.3, 100/10 Mbit FastEthernet, full duplex, bridged, RJ45
connector)
2
13
3
4
8
9
10
12
11
~230VAC
L N - PE
1
0
6
7
5
