- The router will delete the current configuration and restoring the
default configuration and
restarting itself with loaded
default configuration – if the default config doesn’t exists, it is restoring
the
factory config.
c.) Restoring the FACTORY configuration to the router:
- The router must be operating
- Push the RESET for 4sec (entering the service mode) – KERNEL led is lighting (
red
)
- Push the RESET again twice for 1sec with a short pause (selected mode: 2 (
restoring factory
config))
- KERNEL led (red) is flashing twice per second
- Push the RESET again for 6sec (acknowledge your selection)
- The router will delete the current configuration and restoring the
factory configuration and
restarting itself with the original configuration.
