After the restart, you have to log in again and configure the
„
openvpn
” service.
For that, open the
Services
/
OpenVPN
menu, where you can set up an
OpenVPN
connection. The OpenVPN service default port nr. is 1194.
You will find three pre-configured VPN connections that you can enable or change your
settings.
Use the
Enable
option to enable that setting, and then press to
button to start
that VPN rule.
Of course, the rules can be edited by the
button and deleted with the
button.
Attention!
You can also set up a VPN server or client connection here. However, when using a VPN
client, the router assumes the existence of an existing VPN server-side connection, the
connection details of which you must enter here, in the interface.
