o
We do recommend to disable all ports and protocols in the
Firewall
that
you are not currently using (connection / channel / data transfer) taking into
account access to the required ports and channels. To check this, the
Status
/ Firewall
menu section is an excellent option for scanning through traffic
and the
Network / Firewall
menu, where you can add new rules or modify
existing ones.
o
Please check the network traffic of the router frequently in the
Status /
Firewall
menu (port number, incoming IP, especially outgoing data traffic
and downloaded data).
o
Measure throughput and network traffic (per minute, per hour) - with the
help of the
Status / Realtime Graphs
menu or
Statistics / Graphs
where
you can view the calculated and expected traffic volumes, which is
important if you want to avoid congestion. or the data traffic limit of the SIM
card used is limited.
•
If necessary, you can select a dedicated mobile network type (such as 3G only or
4G only), or you can use automatic mode (which connects to the fastest network
type currently available). This allows you to limit the baud rate (and volume) with
the manual settings. You can set this in the
Network / Interfaces
menu on the
WAN
interface by clicking the
button and setting of the
Wireless
network
and
Select IoT Technology
fields.
•
The parameters that can be used for the
APN settings
are always provided by the
SIM card issuer (mobile service provider). Contact them for
APN
,
password
,
SIM
PIN
and other information. You can set them in the
Network / Modem
settings
menu.
•
The router constantly checks the interfaces and the viability of the connections. In
the event of a power failure or power failure, the network and data connections
are automatically reconnected after the conditions are restored.
•
The
RS485
data speed can be set between 300 and 115,200 baud on the web
interface, but the device is able to serve the channel up to 19 200 baud. We
recommend that you use the standard 9 600 baud (for general industrial devices)
or 2 400 baud (for utility meters) for the better compatibility.
•
If you do not want to use the router on a mobile network, but as a wired Ethernet
router with RS485 capabilitiy, then configure that in the
Network / Interfaces
