Translation of the original operation manual Airless
23
Phoenix_BAoDB_en_1210
•
jw
Maintenance 9
Filter insert selection
The insert must:
➤
correspond to the material being sprayed
➤
be compatible with the spray tip used
The mesh should always be a little finer that the bore
of the tip being used:
Filter insert
Tip size (mm/")
from to
M 200 (white)
-
0,23/.009
M 150 (red)
0,23/.009
0,33/.013
M 100 (black)
0,33/.013
0,38/.015
M 70 (yellow)
0,38/.015
0,66/.026
M 50 (orange)
0,66/.026
-
If working with heavily pigmented or fiber-filled
materials:
➤
do not use a filter insert.
➤
the standard suction sieve may need to be re-
placed with a sieve having a larger mesh size.
➤
use a
reversible tip
9.4 Maintenance unit or Regulator Clu-
ster
Picture 9.4.1
Release agent and/or anti-freezing agent
➤
Check the air motor's release agent in the bowl of the
air maintenance unit and refill, if required.
➤
High air humidity can cause icing of the motor.
➤
In case of icing, only use pure anti-freezing agent.
➤
Briefly trigger the spray gun.
➤
To drain pressure, open the drain valve / screw on the
high-pressure filter.
➤
Disassemble the high-pressure filter very carefully!
➤
Replace worn parts with new ones..
Procedure
➤
Hold the drain hose into container "
B
".
➤
Close the air tap lock for the pump.
➤
To depressurize, open the drain valve (Picture 9.3.1).
1 spanner
2 Kappe
3 nut
4 filter insert
5 Stehbolzen
Picture 9.3.2
1 Drain valve
2 Drain hose
Picture 9.3.1
Removing the filter insert
(Picture 9.3.2)
➤
Unscrew the cap (2) with the spanner (1).
➤
Unscrew the nut (3) with a fork wrench.
➤
Remove the filter insert. (4).
➤
Clean the filter insert (4) with the appropriate solvent
recommended by the coatings manufacturer.
Mounting the filter insert
➤
Mount the high pressure filter in reserve order.
➤
Replace the o-ring if material leaks between the main
housing and the cap.
Instructions for both versions
Before restarting the pump ensure that the
unit is properly grounded.
R (corrosion resistant) + RS (stainless) versi-
ons: Lightly grease all threads to ease assem-
bly / disassembly.
