Safety
Original-Betriebsanleitung
HD1+HD2
8
•HD1-2_BAoDB_en_1407•ski
The responsibilities for the different activities on the system must be laid down
clearly and adhered to. No unclear responsibilities may remain as this could
endanger the safety of the users.
The operator must make sure that only authorised persons work on the
machine. He is responsible to third parties in the working vicinity of the system.
The operator of the equipment is obliged to repeat instructions about dangers
and safety measures at regular intervals (at least once a year, for operators
under the age of 21 twice a year).
Personal protective equipment
We call to your attention that the valid guidelines and requirements in
accordance with work surroundings (mining, closed areas etc.) must be
absolutely adhered to.
➤
Please, wear the prescribed protective clothing at all times, as solvent
vapours and solvent splashes cannot be completely avoided.
➤
The sound pressure level of the equipment is below 85 db(A). Nevertheless,
appropriate noise protection means should be made available to the
operating staff.
➤
Although solvent fumes are minimized when the injection pumps is handled
properly, it is still recommended that the operator wear breathing protection.
➤
Never use solvent or other materials which present a health hazard for
cleaning skin. Only suitable skin protective, skin cleansing and skin care
materials may be used.
2.7 Installation site and Transporting and additional equipment
Safety measures at installation site
➤
The system must have a fixed position and sufficient space to ensure safe
operating. Access to the safety devices must not be blocked.
➤
Keep the working area, especially all gangways and standing areas, clean.
Remove spilled paint or solvent immediately.
➤
Ensure there is sufficient ventilation at the workplace to prevent damage to
health and property. Observe the manufacturer’s processing instructions at
all times.
➤
Despite the fact that no legal regulations exist covering the low-fog airless
spraying method, dangerous solvent fumes and particles of paint should be
removed of per vacuum.
➤
Protect any neighboring objects against damage caused by possible
overspray.
➤
Comply strictly with the current rules for accident prevention.
