Start up
Original-Betriebsanleitung
HD1+HD2
16
•HD1-2_BAoDB_en_1407•ski
5.
Empty the unit‘s feed container. (Return remaining solvent to container
„
A
“.)
6.
Slowly open the injection lance and completely pump out any remaining
solvent still in the pump. Ensure the injection lance remains in contact with
the container wall.
7.
Adjust back the air regulator by turning the control screw to the left until it
moves freely.
8.
Close the air tap lock.
9.
Close the injection lance.
Result
The start-up procedures are finished. The pump is ready for use.
