Subject to changes without notice!
Gearless Synchronous Lift Machines
WSG-10
Operating and Maintenance Manual
Page 26
Date 11.29.2016
Version A
Code J40069
Assembly TS5213N2503
Disassembly
• Plug in the measuring system
• Loosen the clamping ring on the measuring
system (2mm Allen screw).
• Remove the M5×45 fastening screw
• Insert the M5×45 fastening screw in the hollow
shaft and tighten the screw
• Tighten the clamping ring on the measuring
system
• Insert the M5×10 setscrew to protect the thread
(see figure) and remove the measuring system by
means of the M6×60 forcing screw.
Please take attention TS52 13N2503 requires
different encoder cable.
Note
Summary of Contents for WSG-10
Page 32: ......
