Page 3
Date 11.29.2016
Version A
Code J40069
Subject to changes without notice!
Gearless Synchronous Lift Machines
WSG-10
Operating and Maintenance Manual
Only qualified personnel are authorized to perform
any planning, installation or maintenance work,
and this must be done in accordance with the
relevant instructi ons.
The personnel must be trained for the job and
must be familiar with the installation, assembly,
commissioning and operation of the product.
The WSG-10 lift machines are intended for use in an
enclosed, lockable machine room or shaft to which
only qualified personnel and personnel authorised
by the customer have access.
1. GENERAL SAFETY INSTRUCTIONS
Explanation of symbols used in these instructions
means that death or serious injury to persons
or serious damage to property will occur unless
the appropriate precautions are taken.
Danger
The WSG-10 lift machines have been manufactured
in compliance with the latest state of the art and
recogn ised safety regulations. They may only be
used for the purpose for which they are intended,
and with all safety devices in proper working order.
The WSG-10 may only be used for driving lifts.
"Intended use" also requires that the instructions
contained in the documentation supplied with
the machine and the commissioning instructions
be observed, and that the speci ed inspection and
maintenance work be carried out.
Our "Conditions of Sale and Delivery" shall apply
for all our supplies and services. The warranty is 18
month.
We do not accept any warranty or liability claims
for personal injury or property damage resulting
from one or more of the following causes:
• Improper use of the WSG-10 lift machine
• Improper installation, commissioning, operation
or maintenance
• Operation of the WSG-10 with defective and/or
inoperative safety or protective devices
• The instructions given in this manual or any
other instructions supplied must always be
observed to avoid danger or damage.
• WSG-10 lift machines are not ready-to-use
products; they may only be operated after
they have been installed in lift syste ms
and their safe operation has been ensured
by taking the appropriate measu res.
• Check the proper functioning of the motor
and the brake after installing the machine.
• Repairs may only be carried out by the
manufacturer or an authorised repair
agency. Unauthorised opening and temp
ering may result in injuries to persons
and property.
• The machines are not designed for direct
connection to the three-phase system
but are to be operated via an electronic
frequency converter. Direct connection
to the mains may destroy the motor.
• The machines can only installed by vertical
direction.
• Non-compliance with the instructions contained in
the operating instructions or other documentation
supp lied
• Unauthorised construction modications to the WSG-10
• Insufcient monitoring of parts subject to wear
• Repairs carried out improperly
• Emergencies caused by external forces or force majeure
means that death or serious injury to persons
or serious damage to property may occur
unless the appropriate precautions are taken.
Warning
means that injuries to persons or damage to
property may occur unless the appropriate
precautions are taken.
Caution
points out important information and operating
instructions. If these are not observed, damage,
hazards or faults may result.
Note
Intended use
Safety precautions
Warranty and liability
Danger
Summary of Contents for WSG-10
Page 32: ......