O p e r a t i n g I n s t r u c t i o n s
OKTOPUS
®
GLASS-Jack
GL-RN 400/600/800
Technical Documentation
BA 000 101
Page 2 of 27
Page
Table of Contents
2
1
General information regarding the OKTOPUS
®
4
1.1
Manufacturer’s information
4
1.2
Service workshop
4
1.3
Scope of application
4
2
Proper use of the OKTOPUS
®
5
2.1
Mode of operation and safety concept of the OKTOPUS
®
system
5
2.2
Safety instructions
6
2.3
Symbols and markings
7
2.4
Design and application of the OKTOPUS
®
8
2.5
Conditions and restrictions of application
11
2.6
Transport and storage
12
3
Instructions for use of the OKTOPUS
®
13
3.1
Power supply
13
3.2
Vacuum supply
14
3.3
Control panel/switch
15
3.4
Start-up
15
3.5
Handling of glass and cladding elements
16
3.5.1
Handling of lying glass and cladding elements
16
3.5.2
Handling of glass and cladding elements standing upright
17
3.5.3
Rotating a load hanging in a vertical position with
the OKTOPUS
®
GLASS-Jack GL-RN 400/600/800 with a crane arm
18
3.5.4
Rotating a load hanging in a vertical position with
the OKTOPUS
®
GLASS-Jack GL-RN 400/600/800 with guide ring
18
3.5.5
Swivelling a load hanging in a vertical position with
the OKTOPUS
®
GLASS-Jack GL-RN 400/600/800 with crane arm
19
3.5.6
OKTOPUS
®
GLASS-Jack GL-RN 400/600/800 slung to the basic frame
20
3.6
Converting the OKTOPUS
®
into its different versions
20
3.6.1
Assembly of the guide ring
20
3.6.2
Mounting of the crane arm
21
3.6.3
Mounting of the extension arms (4 suction pads)
21
3.6.4
Mounting of the extension arms (6 resp. 8 suction pads)
22
4
Servicing and Maintenance
23
4.1
General
23
4.2
Mechanical components
23
4.3
Vacuum system
24
4.3.1
Cleaning the suction pads
24
4.4
Electrics and electrical components
25
5
Conduct in the event of hazardous incidents
27
6
Disposal and Recycling
27
Annex 1:
Short summary of operating instructions
OKTOPUS
®
GLASS-Jack GL-RN 400/600/800
Annex 2:
Functional dimensions
Annex 3:
EC Declaration of conformity
Annex 4:
Test badge pursuant to the directive 2006/42/EU
Annex 5:
Electrical Circuit Diagram