WirelessAlert TextAlert IV, User Manual

Page: 15 / 24

TextAlert
IV
User Manual
9.6 Setting the time on the TA
IV
Send – password#31# (The TA IV will set its time according to the GSM network’s time).
9.7 Setting the automatic arm /disarm time
The TA IV can be set to arm and disarm at a specific time in any 24 hour period. Once you
have set the time using the above Set Time command then you can set auto arm / disarm
time Sending – password#31#2200#0800# - for example will set the arm time to 22:00
and the disarm time to 08:00.
9.8 Resetting linked Zones.
If User would like to reset a zone that has been previously been linked with a now
redundant (or lost) sensor, the command
password#50-65#* * can be used to reset
particular zones. The reset zone/s will then be open for linking of new sensor/s if so
desired as per the linking sensor procedures above (e.g. To reset zone (00) you would use
password#50#* * )
10 TextAlert IV Quick reference Tables - SMS and Phone Call
Commands
All SMS Commands need to be preceded by a password (e.g. 123456#1#0#). Without the
password, TA IV will not recognize them as valid commands.
The commands in Table 3 can also be performed by first dialling the TA IV . Once a call
connection has been established, enter the password on the phones keypad followed by
the particular command. You will hear a ‘beep’ tone sound to indicate that command is
being performed.
The commands in Table 4 and 5 can only be performed via SMS messages, as they
require specific information to be entered for configuration. You will receive a confirmation
SMS for each command and or configuration that you send if SMS reconfiguration
confirmation is enabled.
Table 3: TextAlert
IV
Basic phone Call Commands
Phone command Action / Configuration
* During a Voice Call connection, pressing * on the phone’s keypad will play
back the recorded voice message, if one has been saved on the TA
IV
#1#0# Disarm all zones
#1#1# Away Arm (i.e. all zones armed)
#1#2# Stay Arm (i.e. only specific (outdoor) zones armed)
#2#0# Disable attached siren
#2#1# Enable attached siren
#3#1# Turn on internal microphone to “listen in”
#3#0# Turn off internal microphone
#4#1# Turn on intercom function
#4#0# Turn off intercom function
#5#1# Activate the Relay
#5#0# Deactivate the Relay
Table 4: TextAlert IV Basic SMS Commands
SMS Command Action / Configuration
Password#1#0# Send this command to Disarm all zones
Password#1#1# Away Arm (i.e. all zones armed)
Password#1#2# Stay Arm (i.e. only outdoor zones armed)
Password#2#0# Disable attached siren
Password#2#1# Enable attached siren
Copyright InFocus Trading 111 cc, 2009 15