Table of Contents
ProCam 1500 SFI Manual
ii
TOC
1095900
How to use this manual
Chapter 1 introduces you to the ProCam 1500 ServoFeed Interface (SFI). It
lists the specific feed companies and models with which SFI communicates.
And it explains what you can do with your SFI.
Installation is discussed in Chapter 2. The ProCam 1500 Servo Feed
Interface (SFI) installation is basically the same for all servo feeds. There is
one set of instructions for installing all servo feeds. However, specific wiring
connections and any other differences will be noted in the instructions
wherever they apply. Follow the steps in Chapter 2 to install SFI.
This manual explains how to use SFI in all three ProCam 1500 operating
modes -- Initialization, Program, and Run. Some of the menu choices may
be slightly different depending upon the servo feed to which you are
connected. Keep this in mind when using Chapter 3 —Using the SFI
Menus.
