3
3
Vilhelmsborgvej 15
DK-7700 Thisted
Tel.: (+45) 97990800
Start the ATV, and deactivate the emergency stop. The red button
must be up.
Activate the foot switch and the brake on the handle bar, and shortly
push the button at your right hand. Foot switch and brake lever must
be activated during the entire process. If one of them is released,
the process will stop.
Note:
The emergency stop must always be activated at long stops,
else the battery will be discharged.
1. Starting the Wintex 2000
Program selector
Program 1 takes a soil sample from 0-60 cm. The depth can be
adjusted.
Program 2 takes soil samples from two different layers, from 0-30
cm and from 30-60 cm. The depth can be adjusted.
2. Selection of program
The lower sensor plate defines the depth in program 1 and in
program 2. Loosen the screws, and move the sensor plate up or
down to the desired depth.
3. Adjusting the depth
The upper sensor plate defines where the soil sample in program 2
will be divided. The depth can be adjusted from 0-30 cm. Loosen
the screws, and move the sensor plate to the depth where the soil
samples shall be divided.
