8
8
688. Tightening and Adjustment of Chain
Loosen the bolt, and take it out. Then tighten the chain. Set the
bolt into an appropriate hole and, tighten the bolt.
10. Maintenance
IMPORTANT: After the first 8 hours of operation screws must be tightened.
Daily:
Lubricate the chain for rotation with oil.
Lubricate the chain for probe up/down with oil.
Check all chains tighten them if necessary.
Check and tighten vital parts.
Check the oil level of the hydraulics.
Check screws and nuts and tighten if necessary.
Vilhelmsborgvej 15
DK-7700 Thisted
Tel.: (+45) 97990800
699. Adjusting the sensors
The sensors for rotation must be adjusted so that they are right in
front of the contact points. Both sensors must be placed equally.