Malfunctions
14
9.1 Poor cleaning result
Possible cause
Remedy
The dishes do not get clean
No or low detergent dosing
Set the dosing amount as per the manu-
facturer’s specifications (
12)
Check the dosing lines (for kinks, break-
age, ...)
Replace the storage container if empty
Dishes incorrectly sorted
Do not stack dishes one over the other
Nozzles of the rotating wash
fields blocked
Remove the rotating wash fields and clean
the nozzles (
8.2)
Temperatures too low
Check temperatures (
10)
There is formation of layers on
the dishes
In case of limescale deposits:
The water is too hard
Check the water treatment
Clean thoroughly
In case of starch residues:
Excessively high temperatures
during manual pre-cleaning
(hand shower)
The temperature of the manual pre-wash
should be a maximum of 30 °C
The dishes do not dry on their
own
No or low rinse aid dosing
Set the dosing amount as per the manu-
facturer’s specifications (
12)
Check the dosing lines (for kinks, break-
age, ...)
Exchange the storage container if empty
Rinse temperature too low
Contact an authorised service technician
for the repair
For machines without integral softener:
INFO
The water quality affects the washing and drying performance. We therefore recommend from a
total hardness of more than 3° dH (0.53 mmol/l) that the machine is supplied with softened water.
Summary of Contents for PT 500
Page 1: ...Rack pass through dishwasher PT 500 Operating instructions ...
Page 2: ......
Page 24: ...Electrical connection 22 15 3 Connection diagram ...
Page 29: ......
