Winterhalter PT 500, Operating Instructions Manual

Page: 13 / 30

Servicing and maintenance
11
8.1.2 Self-cleaning programme at the end of the working day
The machine is equipped with a self-cleaning programme that assists you when you are cleaning the inside
of the machine.

Proceed in accordance with Figures C1 to C20.
Terminating the self-cleaning programme

Press this button.

The display is lit in red.

The machine is filled again.
8.1.3 Cleaning the interior
Caution
Ensure that there are no rusty foreign objects in the machine which can cause even "rust-free
stainless steel" material to start rusting. Rust particles can come from non-rust-free cleaners,
damaged wire racks or non-rust-protected water lines.
The following materials must
not be used for cleaning:

High-pressure cleaner

Detergents containing chlorine or acid

Cleaning sponge or wire brush containing metal

Abrasives or abrasive cleaners

Remove dirt with a brush or a cloth.
8.1.4 Cleaning the exterior of the machine

Clean the operating panel and display with a damp cloth.

Clean the external surfaces using a stainless steel cleaner and stainless steel polish.