Winterhalter PT 500, Operating Instructions Manual

Page: 21 / 30

Installing the machine and tables
19
13 Installing the machine and tables
The installation site must be frost-resistant so that the water supply systems do not freeze. If the installation
site is not frost-free:

‎
17
.
13.1 Installing the machine
INFO No gap is required between the wall and rear of machine.

Install the machine horizontally with the help of spirit level.

Adjust the base unevenness with the help of the height-adjustable machine feet.
Installation variants
INFO If the machine is installed in a corner, the left hood handle must be removed. For plugging holes a
kit with part no. 30002147 is available.
13.2 Building tables

Assemble tables.

When Winterhalter tables are used, attach aluminium
strut supports to the machine.
The aluminium strut supports are in the machine.

Secure the tables to the machine.

Connect the earthing cable from the table to the ma-
chine.
13.3 Rack guide conversion
INFO If the machine is installed in a corner, the rack guide must be converted.

Unscrew the front guide bar (1) and attach to the left side of the rack guide.