WIRING & CONTROLS – SCHEMATIC
NOTE: CONNECTION FOR THERMAL PROTECTION SUCH AS A SOLENOID VALVE OR HEAT
EXCHANGER FAN MUST BE PLUGGED INTO THE UPPER, NO: 1 OUTLET ON THE RECEPTACLE
LOCATED ON THE BACK OF THE FURNACE.
CONNECTION FOR THE DRAFT INDUCER MUST BE PLUGGED INTO THE LOWER, NO; 2 OUT-
LET ON THE RECEPTACLE LOCATED ON THE BACK OF THE FURNACE.
DO NOT PLUG IN ANY OTHER DEVICE OR APPLIANCE INTO THESE
DEDICATED OUTLETS.
Continued on next page…
Figure 1 – WinterGreen Furnace Electrical Schematic
WinterGreen
