MAINTENANCE - CHIMNEY
Chimney Fire:
Chimney fires burn very hot. If the stove pipe should begin to glow red and a chimney fire is
suspected:
Ensure the “Furnace Damper” switch on furnace Control panel is OFF. (See “Wiring and Con-
trols - Control Panel section of this manual)
Ensure the “Draft Inducer” switch on furnace Control Panel is OFF. (See “Wiring and Control
- Control Panel section of this manual)
Call the Fire Department immediately and leave the house or outbuilding where the furnace is
located.
Chimneys should be thoroughly inspected by a qualified Chimney
Inspector after chimney fire has occurred. Do not use the chimney
after a fire until it is approved by a Chimney Inspector.
Note: WinterGreen recommends having chimney cleaned annually by a qualified professional.
