DRAFT – SETUP
Continued:
Draft Inducer Setup
Note: The draft inducer and barometric damper must be installed, operating properly and
thoroughly checked before proceeding with the following setup procedure. (See “Draft Inducer –
Barometric Damper” section for the proper installation procedure)
Start a fire in the furnace and turn on the Draft Inducer. (See “Furnace - Primary Fire”
and “Furnace Startup” section of this manual)
Before performing the following draft setup, close all doors and windows in the building the fur-
nace is located in. Turn on all appliances that remove air from the building (e.g. exhaust fans,
clothes dryer, air conditioner, fireplaces etc.)
If the furnace is located in an outside outbuilding with sufficient open spaces for air to pass
through, disregard the previous statement.
WinterGreen recommends that this test be performed by a HVAC professional, certified techni-
cian.
Continued on next page…
43
