![background image](http://html1.mh-extra.com/html/winnebago/reoy/reoy_owners-manual_987507097.webp)
8-5
SECTION 8 –
ENTERTAINMENT
To Watch Satellite TV
1. Turn on receiver and TV.
2. Turn the power switch ON for the antenna.
The dish will begin moving within 10-15
seconds. During this process it is normal to
hear slight grinding sounds as the unit checks
its rotational limits. This does not harm the
unit. A stationary system will now begin
searching for satellite. An In-Motion system
will pause to acquire GPS.
3. For an In-Motion system, after it has verified
the correct satellite, it will continue to track
the signal. If the vehicle is stationary for six
minutes, it will go into “sleep mode”. When
the vehicle begins moving greater than 10
MPH, the In-Motion system will resume
tracking mode.
Further Information
See the Satellite System owner’s manual
in
your InfoCase for a complete description of
features and instructions.
TV DIGITAL SATELLITE
SYSTEM WIRING
Your coach is pre-wired for installation of a
digital satellite TV system. Coaxial cable and
high definition component cable connections are
available to hook up your satellite receiver and
are located near the entertainment center cabinet.
A second connection may be included inside a
cabinet in the bedroom for the rear TV (if
equipped).
See your authorized Winnebago Industries
®
dealer for proper installation and sealing of roof
mounted components.
Stationary and In-Motion Satellite
Dish Controls
(Located in overhead cabinet or
entertainment center cabinet,
depending on model)
-Typical View
Interior Satellite Dish and HDMI Connections
(Located near entertainment center cabinet)
-Typical installation shown
• Satellite Dish
Connections
• HDMI
Connection