![background image](http://html1.mh-extra.com/html/winnebago/reoy/reoy_owners-manual_987507060.webp)
SECTION 6 –
ELECTRICAL
6-2
The power cord is designed to ground the
electrical system through the receptacle. It is also
designed to carry the amperage output of most
campground outlets. If the electrical receptacle to
be used is designed to mate with the prongs of the
power cord plug, the electrical connection can be
expected to carry rated load.
Power Cord Door
(Models with power cord compartment on
sidewall)
–If Equipped
A flip-up passage in the power cord door lets
you route the power cord out of the compartment
and close the door while the power cord is
connected.
Power Cord QuickPort
®
(Models with power cord in utility
compartment)
–If Equipped
The flip-down QuickPort hatch lets you route
the power cord out the bottom of the
compartment so you can close the compartment
door while the power cord is connected.
WARNING
This connection is for 110/125 Volt AC,
60 Hz 30 Ampere supply.
Do not exceed circuit rating. Exceeding
the circuit rating may cause a fire and
result in death or serious injury.
30 Amp Receptacle
•
Swivel the small cover section upward
to access the cord passage.
•
Route power cord through passage
and close door while shoreline is
connected to outlet.