![background image](http://html1.mh-extra.com/html/winnebago/reoy/reoy_owners-manual_987507029.webp)
3-3
SECTION 3 –
DRIVING YOUR MOTORHOME
NOTE: The dinette table must be in the lowered
position when a child seat is in use.
Further Information
See the child seat manufacturer’s specific
instructions for proper attachment and
adjustment of the tether and seat belts.
KEYS
Your motorhome is supplied with several
keys. In addition to the chassis manufacturer’s
ignition key, you receive keys for the entrance
door and exterior compartment doors.
Keys have an identification number, either a
small metal tag or stamped into the key head.
These numbers are recorded on the vehicle’s
component model/serial sheet, which is included
in your InfoCase. In case keys are lost or stolen,
your dealer or a locksmith can provide you with
duplicate keys or modify the locks.
REMOTE KEYLESS ENTRY
The main entry door on your vehicle is
equipped with a Remote Keyless Entry system. If
your coach is featured with a driver door, it also
will be equipped with this system. Use the
provided keyless remote transmitter to lock and
unlock the entry door as well as the driver door (if
equipped).
Make a habit of having the keys with you
when you exit the vehicle and if opening the
driver door (if equipped), first before opening the
entry door whenever unlocking with the keyless
remote.
MIRRORS – POWER ELECTRIC
–If Equipped
Always adjust mirrors for maximum rear
visibility before driving off. Make sure the seat is
adjusted for proper vehicle control and that you
are sitting back squarely into the seat.
Mirror Adjustment Control
The mirror control is located on the driver side
armrest panel or the dash. The ignition key must
be on to adjust the mirrors.
Tether Anchor Loop
1. Lower the dinette table.
2. Route the tether over the top of the dinette seat
back and hook it to the anchor loop on the floor.
3. Fasten the lap belt.
3
2
1
Move Selector Switch L or R to select mirror.
Center “neutral” position disables arrows
to avoid unintentionally moving a mirror.
Press Arrow Buttons to move
mirror surface in direction indicated.