4-3
SECTION 4 –
APPLIANCES AND SYSTEMS
•
After 10 seconds the settings will dim. The
green light indicates the refrigerator is still
functioning.
•
To check the settings push the on/off switch
again. The currently active settings will light
up.
Selecting a Source
•
After switching on the refrigerator, push the
source button several times until the desired
source is selected.
NOTE: The 12V DC operation is only
operational while the engine is running.
Select Cooling Level
•
Push the cooling button several times until the
desired level is selected.
•
Set the refrigerator on cooling level 3, with an
ambient temperature between 60 and 75
degrees. A higher temperature needs a higher
cooling level, a lower temperature a lower
level.
NOTE: The refrigerator will retain temperature
more efficiently if food is cold before
placing inside.
Turn off the Refrigerator
•
Push and Hold the on/off switch for 2 seconds
to switch off the refrigerator.
Further Information
For further information and operating
cautions, see the refrigerator operating
instructions included in your InfoCase.
REFRIGERATOR SERVICE
ACCESS COMPARTMENT
(Exterior) *Model 70A
The exterior refrigerator service compartment
allows access to the rear of the refrigerator for
inspection, maintenance, and service.
To Open
1. Push latch UP to unlock.
2. Remove the door from the opening.
To Close
1. Replace the door into the opening.
2. Push latch DOWN to lock.
• Latch
Refrigerator Access Compartment
(Latch Open)
Refrigerator Access Compartment
(Latch Closed)
