3-5
SECTION 3 –
DRIVING YOUR MOTORHOME
Note: The companion seat must be in the locked
forward facing position.
1. Set child seat upright on rear sofa or in the
companion seat.
2. Route the tether over the top of the seat back
and hook it to the anchor loop on the back of
the sofa or companion seat. Pull tether strap to
tighten.
3. Route the shoulder or lap belt through the
child seat. Fasten the shoulder or lap belt and
pull snug. The locking tab automatically holds
the belt in place.
4. To remove the child seat, press the “red”
release button on the buckle and slide the
tongue out of buckle.
Further Information
See the child seat manufacturer’s specific
instructions for proper attachment and
adjustment of the tether and seat belts.
Tether Anchor Loop
(Located on back side of
companion seat base)
Tether Anchor Loop
(Located on each end of sofa)
- Open rear doors to access
2. Tether
3.
Shoulder
or Lap
Belt
Slide locking
tab to
release
tension on
the shoulder
belt
