![background image](http://html1.mh-extra.com/html/winnebago/era-touring-coach/era-touring-coach_owners-manual_987478033.webp)
3-7
SECTION 3 –
DRIVING YOUR MOTORHOME
Basic Operating Instructions
•
1 - RESET
- Press to reset the microprocessor.
•
3 - +/- (Volume) -
Press to set the volume.
•
4 - MUTE
- Press to mute audio.
•
5 - HOME -
Press to switch the display.
•
6 - MODE
- Turns the information display off.
•
7 -
TRK
- Press for manual tuning.
Press and hold for seek tuning.
•
8 - EJECT
- Press to eject the CD/DVD
10 - DISC LOADING SLOT
Satellite Radio
–If Equipped
Your coach may be equipped with a
SiriusXM
®
satellite radio receiver that plays
through your radio.
See the receiver manufacturer’s information
in your InfoCase for programming and operating
instructions.
USB Cable
-If Equipped
Your coach may be equipped with a cable to
connect your USB to play through your radio.
The USB cable is located in the compartment
above dash radio.
See the manufacturer’s information in your
InfoCase for operating instructions.
Bluetooth
-If Equipped
Your coach may be equipped with a Bluetooth
microphone cable for hands-free cell phone
usage. The microphone cable is located in the
compartment above dash radio.
See the manufacturer’s information in your
InfoCase for operating instructions.
Radio Remote Control
A hand-held remote control for the radio lets
you change radio stations or CD selections from
a distance for your convenience. The remote
control is included in your InfoCase.
Radio Power Switch
The Radio Power switch on the dash lets you
connect the dash radio to the coach batteries
when the ignition switch turned off for listening
while parked. This prevents accidental draining
of the chassis battery by prolonged use of the
radio.
NOTE:The House/Coach Battery Disconnect
switch must be ON while listening to the
dash radio, as the audio relay is powered
by house batteries. If the House/Coach
Battery Disconnect switch is OFF, the
speakers will not emit sound.
USB Cable
(Located in compartment above dash radio)
-Typical Installation