SECTION 3 –
DRIVING YOUR MOTORHOME
3-12
4. Using the hose extension as a remote handle,
unscrew the valve stem cap (retaining cap in
the end of the hose extension).
NOTE: If the valve stem cap and valve stem
extension unscrew as an assembly, pull
the assembly out of the hose extension
end, remove valve stem cap, insert valve
stem extension into hose extension, and
reinstall valve stem extension onto valve
stem until snug.
Pull off hose extension and re-insert
valve stem cap into end of hose.
5. To check inner dual tire pressure, use the long
handle of the tire gauge to control alignment
and avoid misaligned valve stem deflection.
6. When tire pressure testing is complete,
reinstall the valve stem cap (with the cap still
retained in the hose extension end).
7. Remove hose extension from valve stem cap.
Rear Outer Dual Valve Stem
Access
NOTE: Rear Outer Dual is equipped with a fill-
through extension (no valve stem cap).
1. Obtain a double angle push/pull truck tire
gauge.
2. To check rear outer dual tire pressure, use the
long handle of the tire gauge to control
alignment on the fill-through extension.
Inner
rear
dual
Hose
extension
18-Hole Steel Wheel with Push-On Full
Wheel Trim
Stylized Chrome Wheels
