![background image](http://html1.mh-extra.com/html/winnebago/2009-adventurer/2009-adventurer_operators-manual_987444039.webp)
3-13
SECTION 3 –
DRIVING YOUR MOTOR HOME
To close the hood, pull downward and swing
inward. Press top edge of hood panel inward
firmly with palms of your hands to ensure proper
latching.
With the hood open, the engine oil dipstick,
oil fill, radiator fill, power steering reservoir, and
windshield washer reservoir are accessible.
ENGINE ACCESS – INTERIOR
Front Engine Cover
•
To remove the engine cover,
insert the
supplied hex wrench into the hole in the top
center or the front edge of the engine cover.
Turn the hex wrench to the left (counter-
clockwise) to unlatch.
NOTE: On some models there may also be
screws to remove at the lower front
corners. See following photo.
Squeeze latch handles toward hood panel
and raise hood into open position.
Engine Coolant
Reservoir
Engine Oil Fill
Transmission
Fluid Dipstick
Windshield Washer
Fluid Reservoir
Engine Oil
Dipstick
Passenger Side - Typical View
Power Steering
Fluid Reservoir
Brake Fluid Reservoir
Driver Side - Typical View
Insert hex wrench into the hole on the top
center of the engine cover (as shown) or the
front edge of engine cover to unlatch
-Typical View