USER MANUAL
CHAPTER 5
AMI UEFI BIOS SETUP
M-SERIES HMI
33
CHAPTER 5: AMI UEFI BIOS SETUP
This chapter provides information on how to use AMI UEFI BIOS setup, its functions and
menu.
5.1 When and How to Use BIOS Setup
To enter the BIOS setup, you need to connect an external USB keyboard, press
<Del>
key when the prompt appears on the screen during start up. The prompt screen shows
only few seconds, you need to press
<Del>
key quickly. If the message disappears before
your respond, restart the system by turning it OFF and ON, and enter the BIOS again.
IMPORTANT:
Updated BIOS version may be published after the manual released.
Check the latest version of BIOS on the website.
Run BIOS setup utility for:
1.
Error message on screen indicates to check BIOS setup
2.
Restoring the factory default settings.
3.
Modifying the specific hardware specifications
4.
Necessity to optimize specifications
5.2 BIOS Functions
BIOS Navigation Keys
BIOS navigation keys for keyboard control are listed below.
The following keys are enabled during Power-On Self-Test (POST):
Key
Function
Del
Enters the BIOS setup menu.
F7
Display the boot menu. Lists all bootable devices that are
connected to the system. With cursor ↑and cursor ↓and by
pressing <ENTER>, select the device used for the boot.
Pause
Pressing the [Pause] key stops the POST. Press any other key to
resume the POST.
Summary of Contents for R12IBWS-MHM2
Page 18: ...USER MANUAL CHAPTER 1 INTRODUCTION M SERIES HMI 5 1 4 1 Dimensions 15 Unit mm...
Page 19: ...USER MANUAL CHAPTER 1 INTRODUCTION M SERIES HMI 6 1 4 2 Dimensions 17 Unit mm...
Page 20: ...USER MANUAL CHAPTER 1 INTRODUCTION M SERIES HMI 7 1 4 3 Dimensions 19 Unit mm...
Page 21: ...USER MANUAL CHAPTER 1 INTRODUCTION M SERIES HMI 8 1 4 4 Dimensions 21 5 Unit mm...