Winmate R12IBWS-MHM2, User Manual

Page: 23 / 74

USER MANUAL CHAPTER 2 GETTING STARTED
M-SERIES HMI 10
CHAPTER 2: GETTING STARTED
This chapter provides information on how to connect the HMI device to the source of
power, connector pinouts and the guideline to turn on/off the HMI device.
2.1 Powering On
This section explains how to power on the HMI device. Pay attention to the precautions.
2.1.1 AC Adapter Components
Safety Precautions:

Do not use the adapter in a high moisture environment

Never touch the adapter with wet hands or foot

Allow adequate ventilation around adapter while using

Do not cover the adapter with paper or other objects that will reduce cooling

Do not use the adapter while it is inside a carrying case

Do not use the adapter if the cord is damaged

There are NO serviceable parts inside

Replace the unit if it is damaged or exposed to excess moisture
While using the AC Adapter always:

Plug-in the power cord to easy accessible AC outlet

Plug-in the AC adapter to a grounded outlet
AC Adapter
(12V/80W)
Power Cord
3-Pin Terminal Block to DC
Jack
ALTERNATING CURRENT / MISE À LE TERRE!
This product must be grounded. Use only a grounded AC outlet.
Install the additional PE ground wire if the local installation
regulations require it.
Ce produit doit être mis à la terre. Utiliser seulement un cordon
d’alimentation avec mise à la terre. Si les règlements locaux le
requiert, installer des câbles de mise à la terre supplémentaires.