1
2
3
4
5
6
7
8
Print-no. 250 020 1
08/2009
Operating Manual EAV
32
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
4
Operation/Programming
4.1
Electronic automatic locking system
4.1.1 Locking and unlocking
Locking:
• Even when closing the door it is automatically locked by two massive hooks and
the latch in the main lock housing.
• Additional protection is provided by manual locking: one rotation of the key
(1 x 360°) causes the dead bolt in the main lock housing to be thrown.
Opening the door from outside:
• Unlocking via the connected access control system (e. g. Transponder chip, wire
-
less remote control) or with a key.
+
NOTICE! The main dead bolt for additional protection must be unlocked by
keys in any case.
Opening the door from inside, e. g. via:
• the push-button
• the intercom (potential free button!)
• the handle or key (even possible in case of power failure)
4.2
Electronic automatic door locking system with transponder
4.2.1 Operation
The reader unit controls and monitors the access to the door.
• It is operated by means of transponder chips that work contactless.
• Hold a programmed transponder chip within (0 - 8 cm, [0 - 3.150”]) of the
antenna.
• Once the transponder chip is close enough to where it can read the information,
communication is established contact free.
