8
Accessories
7
Technical
specifications
6
Errors
Troubleshooting
5
Maintenance
and care
4
Operation
Programming
3
Installation
2
Product
description
1
Important
information
General
information
Print-no. 250 020 1
08/2009
Operating Manual EAV
33
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
• The transponder data is transmitted to the reader unit via the antenna.
• An acoustic signal at the reader unit will acknowledge the data transfer.
• The reader checks whether this ttransponder chip is authorized to access and
allows or denies access.
Action
Acoustic Signal
U
Result
Door with transponder
chip „Open“
n n
short, short
authorized
• After the enable time has elapsed, another fob can be recognized and evaluated.
• If a transponder chip is unknown to the reader, it does not have access rights and
access will be denied.
Action
Acoustic Signal
U
Result
Door with transponder
chip „Open“
n nnnn
short, long
not authorized
4.2.2 Programming
Each transponder set is supplied with 2 programming cards. (programming card =
green; delete-all card = red) These cards are programmed to this reader/control unit.
Teach-in mode
Programming card:
Set teach-in mode
Ü
Teach Transponder chip
Action
Acoustic Signal
U
Result
Pass the programmable
card over the antenna
n
short, every 0.5 seconds
teach-in mode
„active“
Programmier-
karte
