1
2
3
4
5
6
7
8
Print-no. 250 020 1
08/2009
Operating Manual EAV
38
Aug. Winkhaus GmbH & Co. KG · Berkeser Str. 6 · D-98617 Meiningen · www.winkhaus.de
Subject to technical changes
Display Memory full: The memory has been filled to capacity (max. 85 buttons), if the
teach-in button of a new wireless remote control is used and both LED displays of the
receiver flash simultaneously.
Deleting wireless remote controls directly via the receiver
Partial deletion:
• Press and hold the P1 button of the receiver until the green LED lights up.
• Release the button.
• Press the button of the wireless remote control while the LED is lit up.
• A programmed wireless remote control will be deleted automatically.
• A wireless remote control that has not been programmed by this method will need
a programming analogue „Teaching-in of wireless remote controls directly via the
remote control“.
Delete-all:
• Press and hold the P1 button of the receiver until the green LED lights up.
• Release the button.
• Press the button again until the green and the red LED flash three times.
• Now, all remote controls are deleted.
ON/OFF mode:
• The default setting of the relay of the receiver is „Pulse“.
• You can program it as an ON/OFF relay for additional applications (specified by the
respective application).
• For this purpose, press the P1 button of the receiver until the green LED lights up.
• Release the button again.
• Press the P1 button once more.
• The LED flashes and the relay is switched to the ON/OFF mode.
• Use the same procedure to get to the pulse mode.
• Then, the LED will be lit continuously.
Displaying the occupied memory units:
• Press and hold the P1 button of the receiver until the green LED lights up.
