Page 15
WildlifeCam User Guide
Page 2
WildlifeCam User Guide
Tripods
For very precise placement and aiming,
no mounting method will beat a camera
tripod. A standard threaded tripod mount
(¼”-20) is embedded into the bottom and
rear of the WildlifeCam. This allows users
to attach the WildlifeCam to any tripod
or any of thousands of 3rd-party camera
mounting accessories – providing users
with a world of creative opportunities
through angle and height adjustment.
Mounting Strap
The WildlifeCam comes with a Mounting
Strap to facilitate mounting. You will find
slots in the rear of the WildlifeCam through
which a strap can be threaded. Many users
will tighten the WildlifeCam to a tree,
then wedge a stick or piece of bark
between the WildlifeCam and the tree
to facilitate aiming.
Mounting Arm Accessories
Wingscapes an optional mounting
accessory for the WildlifeCam:
Camera Multi-Mount
(MCA-12669)
This accessory will allow you to easily
mount the WildlifeCam to a common bird
feeder pole, a post, a stake, a wall, or a
tree. Numerous angle settings and 360°
rotation make this mounting arm one of
the most versatile setup options.
Your Wingscapes WildlifeCam offers
nearly limitless mounting opportunities,
allowing you to capture images of wildlife
in practically any situation.
To read more about attracting wildlife to
your backyard and WildlifeCam, visit our
website at
www.wingscapes.com
.
IMPRINT INFO
SETUP MODE
< OPTIONS >
RESET TO
FACTORY DEFAULTS
ERASE ALL IMAGES
(FORMAT CARD)
AC CONNECTED?
DATE & TIME
WI-FI SD CARD?
DETECTION
DELAY
PHOTO OR
VIDEO
MULTI-SHOT
UPGRADE
FIRMWARE
PROGRAM
SECURITY CODE
IMPRINT INFO
PHOTO QUALITY
CAMERA NAME
MOTION FREEZE
PHOTO QUALITY
MANAGED
MEMORY
DATE/TIME:
11/11/11 11:11pm
PHOTO OR VIDEO:
PHOTO
DETECTION DELAY:
10 SECONDS
MULTI-SHOT:
1 (OFF)
UPGRADE FIRMWARE:
NO
PROGRAM SECURITY CODE:
00000
AC CONNECTED?:
NO
Wingscapes WildlifeCam
DEFAULT SETTINGS
