WinFast WS2030 User Manual Download Page 77

Page: 77 / 108

Chapter 6: BIOS

6.7 Boot

Use this feature to configure Boot Settings:

Boot mode select

Use this item to select the type of device that the system is going to boot from. The options
are LEGACY, UEFI, and

DUAL.

The default setting is

DUAL

LEGACY to EFI support

Use this item to enable the EFI boot support.

The options are

Disabled

and Enabled.

FIXED BOOT ORDER Priorities

This option prioritizes the order of bootable devices that the system to boot from. Press
<Enter> on each entry from top to bottom to select devices.

*If the item above, "Boot mode select", is set to Legacy/UEFI/Dual, the following items
will be displayed:

•

Legacy/UEFI/Dual Boot Order #1

•

Legacy/UEFI/Dual Boot Order #2

•

Legacy/UEFI/Dual Boot Order #3

•

Legacy/UEFI/Dual Boot Order #4

•

Legacy/UEFI/Dual Boot Order #5

Summary of Contents for WS2030













































































































Search results

Summary of Contents for WS2030

Reviews:

Related manuals for WS2030

Brands by name

Popular brands

WinFast WS2030, User Manual

Search results

Summary of Contents for WS2030

Reviews:

Related manuals for WS2030

Brands by name

Popular brands