Chapter 6: BIOS
73
Select Enable to allow the BIOS to report the CPU C6 State (ACPI C3) to the operating
system. During the CPU C6 State, the power to all cache is turned off.
The options are
Disable, Enable, and
Auto
.
Enhanced Halt State (C1E)
Select Enable to use Enhanced Halt-State technology, which will significantly reduce
the CPU's power consumption by reducing the CPU's clock cycle and voltage during a
Halt-state. The options are Disable and
Enable
.
Package C State Control
(Available when Power Technology is set to
Custom)
Package C State
This feature allows the user to set the limit on the C-State package register. The options
are C0/C1 state, C2 state, C6 (non Retention) state, C6 (Retention) state, No Limit, and
Auto
.
CPU T State Control
(Available when Power Technology is set to
Custom)
Software Controlled T-States
This feature enables the software controlled T-States support. The options are Disable
and
Enable
Chipset Configuration
Warning:
Setting the wrong values in the following features may cause the system to malfunc-
tion.
North Bridge
This feature allows the user to configure the following North Bridge settings.
UPI Configuration
UPI Configuration
The following information will be displayed:
• Number of CPU
• Number of IIO
• Current UPI Link Speed
Summary of Contents for WS2030
Page 103: ...113 WinFast WS2030 User s Manual...
