WinFast WS2030 User Manual Download Page 44

Page: 44 / 108

RAID Key Header

A RAID_Key header is located at JRK1 on the motherboard. RAID key is used to support

onboard NVMe connections. Please refer to the layout below for the location.

RAID Key Header

PinDefinitions

Pin#

Definition

Ground

RAID_KEY_PU

Ground

PCH_RAID_KEY

Audio Front Panel Header

A 10-pin audio header (AUDIO_FP) located on the motherboard allows you to use the onboard

sound chip (ALC888S) for audio function. Connect an audio cable to the this header to use

this feature. See the table below for pin definitions.

Audio Header

PinDefinitions

Pin#

Definition

Pin#

Definition

Microphone_Left

Audio_Ground

Microphone_Right

Audio_Detect

Line_2_Right

Ground

Jack_Detect

Key

Line_2_Left

Ground

SPDIF_IN Header

The Sony/Philips Digital Interface (JSPDIF_IN1) header is used for digital audio. Place a cap

on each header for audio support. You will also need to have a cable to use the connection.

SPDIF_In

PinDefinitions

Pin#

Definition

S/PDIF_In

Ground

Micro SD Card Slot

Insert a micro SD memory card into the expansion slot at JSDCARD1 for additional memory

or OS image. Please refer to the layout below for the location.

WinFast WS2030 User’s Manual

Summary of Contents for WS2030













































































































Search results

Summary of Contents for WS2030

Reviews:

Related manuals for WS2030

Brands by name

Popular brands

WinFast WS2030, User Manual

Search results

Summary of Contents for WS2030

Reviews:

Related manuals for WS2030

Brands by name

Popular brands