24
Note:
Figure is for illustrative purposes only. Always install servers to the bottom of a rack first.
2-5 Tower Configuration Instructions
The 4U chassis is shipped with the tower top cover and feet pre-installed. To use the chassis as a desktop server, no other
installation is required. Use the instructions in this section if you have converted the chassis for rack use and need to return the
chassis to tower orientation.
Converting to Tower Configuration
1. Remove the rack mount handles.
2. Align the tower top cover post with the corresponding holes on the top of the chassis
and place the cover on the chassis. The cover should hang over the front of the chassis
approximately one-half inch.
3. Slide the chassis cover toward the rear of the chassis to lock the cover into place.
4. Place each chassis foot in place.
5. Secure each foot to the chassis with the screws.
Add the Tower
Top Cover
Add the
Chassis Feet
Figure 2-5. Adding Chassis Feet and the Top Cover
Remove the
Rack Mount
Chassis Handles
WinFast WS2030 User’s Manual
Summary of Contents for WS2030
Page 103: ...113 WinFast WS2030 User s Manual...
