First time Operation – Updating Firmware
Step 1
- Follow steps 1-5 from the
Operation (web) section of this manual to
connect to a useable WiFi source.
Step 2
- Once connected to the internet,
under the NAVIGATE TO PAGE field,
click on the drop-down menu and select
CHANGE PROVIDER
on the main status
screen.
Step 3
- Verify that the correct cellular
provider is listed in the CELLULAR
PROVIDER field and then enter either the
correct APN from the table below, or the
one that your cellular provider provided to
you when you requested your SIM card in
the CELLULAR APN field. Also, be sure
that the Winegard APN check box is NOT
checked.
Step 4
- Click on the CHANGE PROVIDER
button.
Step 5
- Once the download is completed,
click on the
PROCEED
button (if available)
to start the flash procedure. Next, click on
the
4G/LTE ONLY
Internet Access option
on the main Status screen. Your internet
status should change to Connected to
“Your Provider”.
CELLULAR PROVIDER APN (ACCESS POINT NAME)
AT&T
BROADBAND
VERIZON
vzwinternet
Swapping the SIM Card (cont.)
19
