Windsor Clipper Duo, Operating Instructions Manual

Page: 14 / 76

14
Operations
How this machine works
This carpet extractor is an electrical powered, portable
carpet extractor intended for commercial use. The
appliance sprays a cleaning solution onto the carpet
agitates the wet carpet, and then extracts the soiled
solution back into the unit's recovery tank. The
appliance is fitted with and a hand tool for cleaning
upholstery and stairs.
The machine is designed to maintain your carpet using
the Encapsulating Interim Carpet Cleaning Process. By
using the Interim Carpet Maintainer in conjunction with
Windsor Red Carpet Encapsulating Interim Cleaning
(W450-4) or Encapsulating Interim Cleaning with
Carpet Protection (W455-4) chemical solution, you can
perform a regular light cleaning and grooming of your
carpet very quickly, and have the carpet dry and ready
for traffic within 30 minutes.
The machine is also designed to restore your carpet
using carpet extraction chemicals. The machine is
designed to apply cleaning solution onto carpeted floor,
scrub the carpet with two counter-rotating brushes, and
then vacuum the soiled water back into the recovery
tank.
The machine's primary systems are the solution
system, scrub system, recovery system and operator
control system.
The function of the solution system is to store mixed
solution and deliver solution to the appropriate spray
jet. The solution system consists of the solution tank,
strainer, extraction pump and interim pump, solenoid
valve, spray jets, accessory hand tool, and controls.
The solution tank stores solution until it is delivered
through the strainer to the appropriate pump. The
solenoid valve allows flow from the extraction pump to
the extraction nozzle or stops flow at the extraction
nozzle so that the accessory hand tool can be used.
The interim pump provides flow directly to the interim
nozzle. The strainer protects the pump from debris.
The solution pumps control the cleaning solution flow.
The function of the scrub system is to scrub the carpet,
mix the cleaning solution with the soil and lift and groom
the carpet pile. The scrub system consists of two cylin-
drical brushes, motor, and controls. The brushes scrub
the carpet as the motor drives the brushes. The
counter-rotating action of the brushes grooms the
carpet pile.
The function of the recovery system is to vacuum the
soiled water back into the recovery tank. The recovery
system consists of the vacuum shoe, vacuum motor,
float ball filter, recovery tank and controls. The vacuum
shoe extracts the dirty solution from the carpet as the
machine moves forward. The vacuum motor provides
suction to draw the dirty solution off the floor and into
the recovery tank. The float ball filter protects the
vacuum fan from debris and foam. The recovery tank
stores the dirty solution.
The function of the operator control system is to allow
the operator to select the desired function to perform.
This appliance is not suitable for picking up hazardous
dust.
Cet appareil n'est pas conçu pour aspirer des pous-
sières dangereuses.
86408790 Operator’s Manual - Clipper Duo