Windsor Clipper Duo, Operating Instructions Manual, Page: 12 / 76

12
Operations
Technical Specifications
Special Notes:
The sound pressure level at the operator's ear was measured to be 73.7 dBA. This was a nearfield, broad-band
measurement taken in a typical industrial environment on a tile floor. This appliance contains no possible source of
impact noise. The instantaneous sound pressure level is below 63 Pa.
The weighted root mean square acceleration at the operator's arms was measured to be below 2.5m/s2 This was
a tri-axial, third-octave-band measurement made during normal operation on a composite tile floor. The measure-
ment and related calculations were made in accordance with ISO 5349-1.
ITEM DIMENSION/CAPACITY
Construction Steel chassis with rotationally molded polyethylene tanks
Vacuum Motor
Three stage, bypass, 1.5 hp (1,119 watts), 100 cfm (2.8m³/min), 120" (3050 mm)
waterlift
Solution Pump
100 psi (7 bar) - Restorative
50 psi (3.5 bar) - Interim
Brush Motor 1/2 hp (604 watts) AC with circuit breaker protection
Brushes 2 x 16" (406 mm), ABS core, Perform Alert™ bristle spiral pattern
Cleaning Path 16" (40.6 cm)
Flow Rate
Interim - 0.09 gpm ( 0.37 lpm)
Restorative - 1.0 gpm (37.8 lpm)
Solution Spray
Interim - One quick-disconnect jet
Restorative - One quick-disconnect jet
Solution Tanks 10 gallons ( 37.8 l)
Recovery Tank 10 gallons (37.8 l)
Vacuum Shoe 18" (458 mm) wide, cast aluminum
Wheels 10" (254 mm) non-marking rubber
Power Cable 50' (15 m) detachable
Weight 166 lbs (75.3 kg) with cord
86408790 Operator’s Manual - Clipper Duo