Windsor 10086130, Operating Instructions Manual, Page: 41 / 136

MAINTENANCE- DRIVE ASSEMBLY
86292490 VOYAGER DUO 08/20/07
4-18
DRIVE MOTOR CARBON BRUSH REPLACEMENT
Do not use a pressure washer to clean around
the motors. Use tap pressure only.
FOR SAFETY: Before leaving or servicing
machine, stop on a level surface, turn off
machine and remove key.
1. Disconnect batteries from machine.
2. Disconnect the electrical connection to the
traction motor.
3. Remove brush cap.
4. Release brush from spring tension. Remove
screw connecting brush wire lead to brush
holder. Clean brush holder to insure free
movement.
7. Install new brush and reinstall connecting screw
and lead.
8. When all new brushes are installed. Place all in
retracted position, held into brush holder by
spring tension.
9. Carefully replace brush cap.