Windsor 10086130, Operating Instructions Manual, Page: 30 / 136

MAINTENANCE-SCRUB DECK
86292490 VOYAGER DUO 08/20/07 4-7
SCRUB HEAD
The dual cylindrical scrub head is designed to scrub
chemical into the carpet. The two counter rotating
brushes raise the pile of the carpet, giving it a lush
groomed appearance.
MAINTENANCE
Scrub brushes should be exchanged front to back
every 50 hours to ensure even wear. Scrub brushes
should be replaced as a set when bristle length
wears to height of yellow Perform Alert
TM
bristles.
SCRUB BRUSH REMOVAL
The scrub brushes are removed from the right side
of the machine.
1.
Raise the scrub deck to the storage position.
2.
Pull out on the bottom of the retaining clip.
3.
The brush assembly and end cap should drop
down. Then pull the brush down far enough to
clear the bottom of the housing
.
4.
Pull brush out with a rocking motion to free
brush from drive hub.
SCRUB BRUSH REPLACEMENT
1. Lift the drive side of the brush and push it onto
drive hub until a positive stop is felt. The brush
cannot be installed until the brush is fully seated
on the drive hub.
2. Pull out on the bottom of the retaining clip.
3. Line up the end cap with the flats to each side.
4. Slide brush up into the retaining clip until it clicks
in place.